AWAN 3883/4/5 Access Server Configuration and Management Manual

About This Manual
AWAN 3883/4/5 Access Server Configuration and Management Manual—424242-001
xxi
Related Manuals
Related Manuals
This manual is meant to be used in conjunction with the AWAN Access Server
Installation and Support Guide, which explains how to install port and link modules in,
connect devices to, and diagnose problems with the AWAN access server.
Depending on the type of network connections you plan to configure, you might also
need to refer to one or more of the following manuals
•
LAN Configuration and Management Manual
•
TCP/IP Configuration and Management Manual (Himalaya S-series servers) or
Tandem NonStop TCP/IP Configuration and Management Manual (Himalaya
K-series servers)
•
TLAM Configuration and Management Manual
•
SCF Reference Manual for Telserv
•
Guardian User’s Operations Guide
•
Spooler Utilities Reference Manual or Spooler Plus Utilities Reference Manual
•
Remote Server Call (RSC) Installation and Management Guide
•
NonStop ODBC Server Installation and Management Manual
•
iTP Secure WebServer System Administrator’s Guide
•
LAN Print Spooler Manual
13 Configuring Security
for Remote Access
Users
Describes how to set up authentication and
authorization for remote access users.
14 Managing the AWAN
Access Server
Describes how to perform common management
tasks, such as updating the AWAN access server
firmware.
15 Troubleshooting the
AWAN Access Server
Describes how to troubleshoot your AWAN access
server.
A Blank Configuration
Worksheets
Contains blank configuration worksheets that you
can photocopy and use when planning your network
connections.
B Software
Specifications
Contains the AWAN access server software
specifications.
C Command Line
Interface (CLI)
Commands
Describes the Command Line Interface (CLI)
commands that are commonly used during
installation, configuration, and troubleshooting.
Table i. Contents (page 2 of 2)
Section or
Appendix Title Contents