AWAN 3883/4/5 Access Server Configuration and Management Manual

Managing the AWAN Access Server
AWAN 3883/4/5 Access Server Configuration and Management Manual—424242-001
14-17
Resetting the AWAN Access Server
Resetting the AWAN Access Server
The RAS Management Tool provides two reset options:
•
Soft reset, which reboots the AWAN access server but retains the configuration
parameter settings.
•
Factory reset, which changes the configuration parameters to the factory default
settings.
Factory default settings for RS-232 Asynchronous and RS-232/20mA Current Loop port
modules and all 3883 ports are shown in Table 14-1
.
Factory default settings for modem port modules are shown in Table 14-2
.
Table 14-1. Factory Default Settings (Async, Current Loop, and 3833 Ports)
Configuration Parameter Default Setting
Term Type 6530
Flow XON
Speed 19200
Char Size 7
Parity Even
Stop Bits 1
Hardware Interface* 20mA Current Loop
Username guest
Access Dynamic
Autoconnect Disabled
Preferred None
*Applies to RS-232/20ma Current Loop port modules only.
Table 14-2. Factory Default Settings (Modem Port Modules)
Configuration Parameter Default Setting
Term Type ANSI
Flow CTS
Speed 115200
Char Size 8
Parity None
Access Dynamic