5 Access Server Configuration and Management Manual

Managing the AWAN Access Server

AWAN 3883/4/5 Access Server Configuration and Management Manual—424242-001

14-19

Disabling a Port

To disable a port, choose Disable from the Port-Specific menu. The Disable dialog box

is displayed as shown in Figure 14-17.

Click the check box next to the port you want to disable and then click OK.

Compaq support recommends that you disable a port by choosing None from the Access

drop-down list box on the Adv. Line tab dialog box. To display the Adv. Line tab dialog

box, choose Properties... from the Port-Specific menu and then click the Adv. Line tab.

The Adv. Line tab dialog box is shown in Figure 14-18

with the None access type

selected.

Figure 14-17. Disable Dialog Box

Note. The Disable dialog box is available for RS-232 Asynchronous port modules and

R-232/20mA Current Loop port modules only; it is not available for modem port modules and

AWAN access server 3883-8, 3883-8R, 3883-16, and 3883-16R models.