AWAN 3883/4/5 Access Server Configuration and Management Manual

Managing the AWAN Access Server
AWAN 3883/4/5 Access Server Configuration and Management Manual—424242-001
14-22
Deleting a Configuration File
To map a network drive:
1. Select the drive that will be used to connect to the network computer in the Drive
drop-down list box.
2. Select the path of the shared folder you want to connect to in the Path drop-down list
box.
Click the Reconnect at logon check box if you want to connect to the shared folder
every time you start Windows.
Deleting a Configuration File
To delete a .RAS configuration file, click the Control menu button on the server icon and
choose Delete. The RAS Management Tool displays a dialog box to verify your request.
Click Ye s to proceed or No to cancel.
Figure 14-20. Map Network Drive
Note. Do not enable the Reconnect at logon check box if the shared folder will be used
infrequently.
Note. The Delete button is only available when there is no active communication with the
AWAN access server.