AWAN 3883/4/5 Access Server Configuration and Management Manual

Command Line Interface (CLI) Commands
AWAN 3883/4/5 Access Server Configuration and Management Manual—424242-001
C-18
Show Port Count Command
RXBERR
indicates internal-receive bus errors.
Receive ring buffer error
indicates a ring error.
6530 Send Timeouts
indicates that no response has occurred from the terminal after the AWAN access
server sent a block-mode data block, a block-mode write-read, or a mode-change
command.
6530 Receive Timeouts
indicates incomplete data block from the terminal when in block mode.
6530 nacks rcvd
is the count of ASCII NACKs received, indicating there is a checksum error in the
AWAN access server output.
6530 bad lrc rcvd
indicates that the check character does not match the calculated checksum on the
data arriving from the terminal.
6530 Hard resets rcvd
is the count of ASCII ENQ characters received, which the terminal sends to AWAN
access server after powerup and on hard reset.
6530 ITI ack timeouts
indicates no ACKnowledge from the terminal in response to ENQ from the AWAN
access server in conversational mode.