5 Access Server Configuration and Management Manual

Configuration Overview

AWAN 3883/4/5 Access Server Configuration and Management Manual—424242-001

2-2

Summary of Configuration Tasks

Configuring an AWAN access server involves a number of tasks. Table 2-1 lists each

task in the order in which it must be performed and indicates where in this manual the

task is described.

Table 2-1. Configuration Tasks

Task Description Where This Task Is Described

1. Install the Management software on a

Windows-based personal computer

(PC)

Section 3, Installing the Software

2. Set up security for the RAS

Management Tool

Section 4, Setting Up RAS Management

Tool Security

3. Learn how to use the RAS

Management Tool

Section 5, Using the RAS Management

Tool

4. Configure the AWAN access server Section 6, Configuring the AWAN Access

Server

5. Configure access to the AWAN access

server

Section 7, Configuring User and Port

Access

6. Configure network connections Depending on the type of connection you

want to configure, consult one of the

following sections:

Section 8, Configuring Asynchronous

Terminal and Serial Printer Connections

Section 9, Configuring Remote Access

Connections

Section 10, Configuring the 6530 Gateway

Feature

Section 11, Configuring Dial-Out

Connections

Section 12, Configuring Modem

Connections

7. Set up security for remote access users If you configured remote access

connections, you should set up security for

remote access users following the

instructions provided in Section 13,

Configuring Security for Remote Access

Users.