AWAN 3883/4/5 Access Server Configuration and Management Manual

Setting Up RAS Management Tool Security
AWAN 3883/4/5 Access Server Configuration and Management Manual—424242-001
4-2
Starting the Checkpoint Program
Starting the Checkpoint Program
To start the Checkpoint program:
•
Windows 3.11 or Windows NT 3.51: Double-click on the Checkpoint icon in the
RAS Management program group.
•
Windows 95 or Windows NT 4.0: Choose Start> Programs> RAS Management>
Checkpoint.
The Checkpoint login dialog box is displayed as shown in Figure 4-1
.
You use the buttons on the Checkpoint Menu Selections dialog box to perform the tasks
described in the rest of this section. To obtain help for the Checkpoint program, click
Help on the Checkpoint menu bar to access the Help drop-down menu.
Figure 4-1. Checkpoint Login Dialog Box
Step Action Comments
1. Type checkpoint in the System
Administration Password text box.
checkpoint is the default system
administration password.
2. Click OK. The Checkpoint Menu Selections dialog
box is displayed as shown in Figure 4-2.
Figure 4-2. Checkpoint Menu Selections Dialog Box