AWAN 3883/4/5 Access Server Configuration and Management Manual

Setting Up RAS Management Tool Security
AWAN 3883/4/5 Access Server Configuration and Management Manual—424242-001
4-6
Adding Users and Configuring User Access
Adding Users and Configuring User Access
To add users and configure user access, click User List... on the Checkpoint Menu
Selections dialog box. The Checkpoint User List dialog box is displayed as shown in
Figure 4-6.
Note. The Checkpoint user list is used to authenticate and authorize various capabilities for
users of the RAS Management Tool. It should not be confused with the AWAN access server
user list, which is created using the RAS Management Tool. The AWAN access server user list
stores the names, passwords, and authorized protocols for users who will connect to the
AWAN access server. The AWAN access server user list is described in detail in Section 7,
Configuring User and Port Access.
Figure 4-6. Checkpoint User List Dialog Box
Step Action Comments
1. Type a user name in the User text box. Format: User names must be a minimum
of 6 characters and may be a maximum of
15 characters long.
2. Click Add. The Checkpoint Add User dialog box is
displayed as shown in Figure 4-7
.