AWAN 3883/4/5 Access Server Configuration and Management Manual

Setting Up RAS Management Tool Security
AWAN 3883/4/5 Access Server Configuration and Management Manual—424242-001
4-9
Exiting the Checkpoint Program
Exiting the Checkpoint Program
To exit the Checkpoint program, click the close button on the upper right corner of the
Checkpoint Menu Selections dialog box.
Step Action Comments
1. If you want user passwords to expire after
a specified period of time:
•
Enable the Enable Password
Expiration check box.
•
Type the number of days that may
elapse before the user has to change
his or her password in the Password
Expires in text box.
If you do not want user passwords to
expire, do not enable the Enable Password
Expiration check box.
Format: The number of days may be
from 1 to 90.
Note: There is no age requirement for
the System Administration password.
2. Choose a value from the Password
Uniqueness drop-down list box if you
want to ensure that a user cannot reuse the
same password when a password expires.
Setting the previous passwords to four,
for example, means that a new password
must be unique to the last four
passwords that were used. Six is the
maximum setting allowed.
3. Enable the Allow User to select user name
from List check box if you want users to
be able to choose a user name from a list
of available names when they log in.
If you disable this check box, users must
enter a user name at login time.
4. Type the system administration password
in the System password text box.
The system administration password is
required to make changes to user
account policy settings.
5. Click OK.