5 Access Server Configuration and Management Manual

Using the RAS Management Tool

AWAN 3883/4/5 Access Server Configuration and Management Manual—424242-001

5-15

Using the Port-Specific Menu

To configure or control a specific port on your AWAN access server, click on a port on

the port module diagram using the right mouse button. The Port-Specific menu is

displayed as shown in Figure 5-12

Table 5-4

shows you where each selection on the Port-Specific menu is described in this

manual.

Figure 5-12. Port-Specific Menu

Table 5-4. Port-Specific Menu Selections (page 1 of 2)

Selection Item Where to Find Information in This Manual

Disable... Disabling a Port

on page 14-19

Clone... Cloning a Port Configuration on page 14-7