5 Access Server Configuration and Management Manual

Using the RAS Management Tool

AWAN 3883/4/5 Access Server Configuration and Management Manual—424242-001

5-16

Using the Module-Specific Menu

To control a specific module on your AWAN access server, click on the button on the

upper left corner of the port module diagram. The Module-Specific menu is displayed as

shown in Figure 5-13

Restore, Move, Minimize, and Close are standard Control menu button selections. The

Clone... selection enables you to copy configuration settings from one port module to

another. Cloning module configuration settings is explained in Cloning a Module

Configuration on page 14-8.

Reset... Resetting a Port on page 14-18

View Port Activity

Statistics

Viewing Port I/O Activity on page 14-12

Viewing Port Statistics on page 14-11

Properties... The following sections describe how to configure port

properties for particular AWAN access server connections:

•

Section 8, Configuring Asynchronous Terminal and

Serial Printer Connections

•

Section 9, Configuring Remote Access Connections

•

Section 10, Configuring the 6530 Gateway Feature

•

Section 11, Configuring Dial-Out Connections

•

Section 12, Configuring Modem Connections

Figure 5-13. Module-Specific Menu

Table 5-4. Port-Specific Menu Selections (page 2 of 2)

Selection Item Where to Find Information in This Manual