AWAN 3883/4/5 Access Server Configuration and Management Manual

Using the RAS Management Tool
AWAN 3883/4/5 Access Server Configuration and Management Manual—424242-001
5-18
Using the Dialog Boxes
Using the Dialog Boxes
The RAS Management Tool uses dialog boxes that contain list boxes, option buttons,
command buttons, check boxes, and text boxes. You work with these elements just as
you do in other applications. To navigate through the RAS Management Tool, you click
on tabs and command buttons.
Table 5-6
describes the most common command buttons.
Users... Configuring Authentication on page 13-4
Services Telnet
Port L0
Configuring Serial Printer Connections on page 8-28
Configuring Port L0 on the AWAN Access Server on page 10-3
Properties... General
IP
IPX
SNMP
Logging
Activity
Configuring General Properties on page 6-3
Configuring IP Properties on page 6-5
Configuring IPX Properties on page 6-6
Configuring SNMP Properties on page 6-7
Configuring Logging Properties on page 6-8
Configuring Accounting Properties on page 6-12
Table 5-6. Command Buttons (page 1 of 2)
Use this button... To perform this task...
Add the information entered in the current dialog box to the
configuration.
Save the information entered in the current dialog box without
closing the dialog box. This button also enables you to move to other
tabs in the group.
Discard configuration changes that have not been applied and close
the current dialog box.
Delete the information selected on the current dialog box from the
configuration.
Table 5-5. Server Characteristics and Properties Menu Selections (page 2 of 2)
Selection Item Where to Find Information in This Manual