5 Access Server Configuration and Management Manual

Using the RAS Management Tool

AWAN 3883/4/5 Access Server Configuration and Management Manual—424242-001

5-25

SNMP Timer

Using an ASCII editor or Notepad, you can edit the c:\windows\rasmgmt.ini file

and add a SNMP_Timer parameter. This parameter controls SNMP request timing.

Under the [Options] line, add a line containing the following:

SNMP_Timer=nnn

Where nnn is in approximately 0.030 (30 millisecond) units. The default value of 1000

represents approximately 3 seconds. This SNMP_Timer parameter might improve

operation when there are many routers, especially with slow links, between the AWAN

GUI and the AWAN device. Conversely, raising this value can negatively affect all

AWAN GUI operation.

Modifying a User Password

To modify a user password, choose Login from the Options pull-down menu on the RAS

Management Tool menu bar. The Login and Modify User Password dialog box is

displayed as shown in Figure 5-20

Click Modify user password... to display the Change User Password dialog box. The

Change User Password dialog box is shown in Figure 5-21

Figure 5-20. Login and Modify User Password Dialog Box