AWAN 3883/4/5 Access Server Configuration and Management Manual

Using the RAS Management Tool
AWAN 3883/4/5 Access Server Configuration and Management Manual—424242-001
5-28
Saving a Configuration File
To specify the configuration file you want to save:
1. Type the name of the configuration file in the File name text box. If you want to
replace an existing file, you can display all the files in the specified folder by
choosing All Files (*.*) from the Save file as type drop-down list box and then select
the file you want to replace.
2. Specify the drive where you want the configuration file to be saved by selecting a
drive from the Drives drop-down list box.
3. Specify the folder where you want the configuration file to be saved by selecting a
folder from the Folders list box.
4. Click OK to save the file.
You can also map a network drive by clicking the Network... button. The Map Network
Drive dialog box is displayed as shown in Figure 5-26.
To map a network drive:
1. Select the drive that will be used to connect to the network computer from the Drive
drop-down list box.
2. Select the path of the shared folder you want to connect to from the Path drop-down
list box.
3. Click the Reconnect at logon check box if you want to connect to the shared folder
every time you start Windows.
4. Click OK.
Figure 5-23. Map Network Drive
Note. Do not enable the Reconnect at logon check box if the shared folder will be used
infrequently.