AWAN 3883/4/5 Access Server Configuration and Management Manual

Using the RAS Management Tool
AWAN 3883/4/5 Access Server Configuration and Management Manual—424242-001
5-30
Storing a Configuration File
Activating the Services Option
To activate, or ungray, the Services option, perform the following procedure to load the
current Services configuration from the AWAN into the RAS Management tool:
1. Right click on the front panel of the Server.
2. Click Services.
3. Click Telnet.
4. Left click any entry in the right hand Active column. (R00 is usually the first entry.)
5. Click Properties.
6. Do not change any settings; just click OK twice.
7. Right click on the front panel of the Server.
8. Click Services.
9. Click Port L0.
10. Do not change any settings; just click OK.
11. Return to the Server Store configuration screen. The Services option is no longer
grayed out.
12. Select one or more options, and then click OK.
The Store Configuration File As... dialog box appears as shown in Figure 5-25
.
Figure 5-25. Store Configuration File As... Dialog Box