AWAN 3883/4/5 Access Server Configuration and Management Manual

Configuring the AWAN Access Server
AWAN 3883/4/5 Access Server Configuration and Management Manual—424242-001
6-7
Configuring SNMP Properties
•
Remote-node address. To override the remote-node address, type the new remote-
node address in the RN Address text box.
To configure NASI security, click the Dial-In and/or Dial-Out check boxes in the NASI
Security area. (NASI dial-in and dial-out are described in detail in Section 9,
Configuring Remote Access Connections.)
Configuring SNMP Properties
To configure SNMP properties, choose Properties... from the Server Characteristics and
Properties menu and then click the SNMP index tab. The SNMP index tab dialog box is
displayed as shown in Figure 6-5
.
Figure 6-5. Properties Screen—SNMP Index Tab Dialog Box