AWAN 3883/4/5 Access Server Installation and Support Guide
Table Of Contents
- What’s New in This Manual
- About This Manual
- 1 Introduction to the AWAN Access Server
- 2 Installing the AWAN Access Server
- 3 Maintaining the AWAN Access Server
- A Hardware Specifications
- B Modems
- C Adapter Hood Pinouts
- DB-9 PC Adapter Hood Pinouts (RS-232)
- DB-25 Terminal Adapter Hood Pinouts (RS-232)
- DB-25 Printer Adapter Hood Pinouts (RS-232)
- DB-25 Modem/Host Adapter Hood Pinouts (RS-232)
- DB-25 Host Adapter Hood Pinouts (Current Loop)
- DB-25 Terminal Adapter Hood Pinouts (Current Loop)
- DB-9 Host Adapter Hood Pinouts (Current Loop)
- Index
AWAN 3883/4/5 Access Server Installation and Support Guide—424241-001
C-1
C
Adapter Hood Pinouts
This appendix describes the DB-9 and DB-25 adapter hood pinouts for personal
computers (PCs), terminals, printers, and modems.
DB-9 PC Adapter Hood Pinouts (RS-232)
The DB-9 PC adapter hood pinouts for RS-232 are shown in Figure C-1.
Note. Custom adapters can be purchased from Compaq. These adapters are listed in
Ta ble 2- 3
on page 2-5.
Figure C-1. DB-9 for PC (RS-232)
Note. Many PCs have a male DB-9 connector for the COM1 port.
RJ-45 Pin
1
2
3
4
5
6
7
8
NC
DB9 Pin
9
8
1
4
5
2
3
6
7
DTR
RxD
TxD
DSR
RTS
GND
CTS
DCD
DSR
TxD
RxD
DTR
CTS
GND
RTS
OPEN
CDT008.CDD