AWAN 3883/4/5 Access Server Installation and Support Guide
Table Of Contents
- What’s New in This Manual
- About This Manual
- 1 Introduction to the AWAN Access Server
- 2 Installing the AWAN Access Server
- 3 Maintaining the AWAN Access Server
- A Hardware Specifications
- B Modems
- C Adapter Hood Pinouts
- DB-9 PC Adapter Hood Pinouts (RS-232)
- DB-25 Terminal Adapter Hood Pinouts (RS-232)
- DB-25 Printer Adapter Hood Pinouts (RS-232)
- DB-25 Modem/Host Adapter Hood Pinouts (RS-232)
- DB-25 Host Adapter Hood Pinouts (Current Loop)
- DB-25 Terminal Adapter Hood Pinouts (Current Loop)
- DB-9 Host Adapter Hood Pinouts (Current Loop)
- Index
Adapter Hood Pinouts
AWAN 3883/4/5 Access Server Installation and Support Guide—424241-001
C-2
DB-25 Terminal Adapter Hood Pinouts (RS-232)
DB-25 Terminal Adapter Hood Pinouts (RS-232)
The DB-25 terminal adapter hood pinouts for RS-232 are shown in Figure C-2.
DB-25 Printer Adapter Hood Pinouts (RS-232)
The DB-25 printer hood pinouts for RS-232 are shown in Figure C-3.
Figure C-2. DB-25 for Terminal (RS-232)
Note. Many PCs have a male DB25 connector for the COM2 port.
Figure C-3. DB-25 for Printer (RS-232)
RJ-45 Pin
1
2
3
4
5
6
7
8
DB25 Pin
5
8
20
7
3
2
6
4
DTR
RxD
TxD
DSR
RTS
GND
CTS
DCD
DSR
TxD
RxD
DTR
CTS
GND
RTS
OPEN
CDT009.CDD
RJ-45 Pin
1
2
3
4
5
6
7
8
DB25 Pin
5
8
4
7
3
2
6
20
RTS
RxD
TxD
DSR
DTR
GND
CTS
DCD
DSR
TxD
RxD
DTR
CTS
GND
RTS
OPEN
CDT014.CDD