AWAN 3883/4/5 Access Server Installation and Support Guide
Table Of Contents
- What’s New in This Manual
- About This Manual
- 1 Introduction to the AWAN Access Server
- 2 Installing the AWAN Access Server
- 3 Maintaining the AWAN Access Server
- A Hardware Specifications
- B Modems
- C Adapter Hood Pinouts
- DB-9 PC Adapter Hood Pinouts (RS-232)
- DB-25 Terminal Adapter Hood Pinouts (RS-232)
- DB-25 Printer Adapter Hood Pinouts (RS-232)
- DB-25 Modem/Host Adapter Hood Pinouts (RS-232)
- DB-25 Host Adapter Hood Pinouts (Current Loop)
- DB-25 Terminal Adapter Hood Pinouts (Current Loop)
- DB-9 Host Adapter Hood Pinouts (Current Loop)
- Index

Adapter Hood Pinouts
AWAN 3883/4/5 Access Server Installation and Support Guide—424241-001
C-5
DB-9 Host Adapter Hood Pinouts (Current Loop)
DB-9 Host Adapter Hood Pinouts (Current Loop)
The DB-9 host adapter hood pinouts for Current Loop are shown in Figure C-7.
Figure C-6. DB-25 for Terminal (Current Loop)
Figure C-7. DB-9 for Host (Current Loop)
25
7
TX- 13
TX+ 12
GND 1
RX- 11
RX+ 10
3 TX+
4 TX-
8 RX+
6 RX-
RJ-45 Pin
DB-25 Pin
OPEN
OPEN
CDT072.CDD
070CDT .CDD
RJ-45 Pin
3
4
6
8
DB9 Pin
Rx+
Rx-
GND
Tx+
Tx-
Tx+
Tx-
Rx+
Rx-
OPEN
2
6
7
2
1