AWAN 3883/4/5 Access Server Installation and Support Guide

AWAN 3883/4/5 Access Server Installation and Support Guide—424241-001
vii
About This Manual
The AWAN 3883/4/5 Access Server Installation and Support Guide describes how to
install and maintain Asynchronous wide area network (AWAN) access server models
3883-8, 3883-8R, 3883-16, 3883-16R, 3884, 3884R, 3885, and 3885R. This manual
includes the following information:
•
Descriptions of the AWAN access server models and link, port, and power supply
modules
•
Physical descriptions of the panel indicators on the various AWAN access server
models
•
Step-by-step instructions for installing and replacing an AWAN access server
•
Step-by-step instructions for installing and removing link and port modules and for
replacing the fuse
•
Information about connecting devices to an AWAN access server
•
Detailed hardware specifications, including supported modems and adapter-hood
pinouts
Who Should Use This Manual
This manual is written for anyone who installs or maintains an AWAN access server.
How This Manual Is Organized
This manual consists of three sections and two appendixes. Table i summarizes the
contents of this manual.
Note. Refer to the AWAN 3883/4/5 Access Server Configuration and Management Manual for
firmware upgrade instructions.
Table i. Contents (page 1 of 2)
Section or
Appendix Title Contents
1 Introduction to the
AWAN Access Server
Provides an introduction to the AWAN access server.
2 Installing the AWAN
Access Server
Provides step-by-step instructions for installing your
AWAN access server, link and port modules, and
power supply modules. This section also describes
how to connect devices to your AWAN access server.
3 Maintaining the
AWAN Access Server
Describes how to maintain your AWAN access
server.