AWAN 3886 Server Installation and Configuration Guide

AWAN 3886 Server Installation and Configuration Guide—427428-006

What’s New in This Guide

Guide Information

Abstract

This guide provides an overall guide to the installation and configuration of the

asynchronous wide area network (AWAN) 3886 devices for 6530 terminal support and

current-loop support in the HP NonStop™ environment. The guide is written for field

personnel or anyone who installs or maintains network equipment on HP NonStop

K-series systems, HP NonStop S-series systems, and HP Integrity NonStop NS-series

systems.

Product Version

N.A.

Supported Revision Version Updates (RVUs)

This guide supports D42 and all subsequent D-series RVUs, G03 and all subsequent

G-series RVUs, and H06.03 and all subsequent H-series RVUs until otherwise

indicated in a new edition.

Document History

New and Changed Information

This guide supports D-, G-, and H-series RVUs. The differences between these RVUs

are that the following products are only supported on D- and G-series RVUs: TSM,

FOX, IPX/SPX, and Parallel Library TCP/IP on AWAN devices.

This guide includes these changes:

Part Number Published

427428-006 April 2006

Part Number Product Version Published

427428-006 NA April 2006

427428-004 NA September 2005

427428-003 NA June 2004

427428-002 NA August 2002

427428-001 NA November 2000

Note. In April 2006, removed cable part numbers from Section 1, Introduction to AWAN 3886-

Series Servers, Section A, Adapters for Cables and Devices, and Section B, Current-Loop

Support. To view part numbers, from the home page of the NonStop Technical Library (NTL),

select Support and Service > Service Information > Part Numbers.