AWAN 3886 Server Installation and Configuration Guide

AWAN 3886 Server Installation and Configuration Guide—427428-006
Index-1
Index
Numbers
3886 AWAN device
features 1-4
special features C-7
3886-08 AWAN unit
back panel C-2
front panel C-1
3886-16 AWAN unit
back panel C-3
3886-32 AWAN unit
front panel 1-10
3886-6530 1-14
3886-CL
current-loop support B-1
part number 1-13
6530 protocol support 1-3
8-Line Cable Organizer B-1
A
Access Server Loader configuration 2-18
Access Server Manager 1-23
description 1-23
using it with 6530 1-23
Accessing NPIL 1-25
Adobe Acrobat Reader 1-25, 1-26
ASM modem configuration 2-32
Asynchronous terminal servers 1-2
ATAP ports 1-19
ATAP printers 1-15
AUI port 1-7, 1-11, 1-12
AUI-10BaseT Converter 1-13
AUI-RJ45 converter 1-13
Autobaud detection, default
configuration C-7
Autobaud disabled 2-27
Autobaud enabled, default setting 2-26
Autoconnect enabled
connection 2-27
explanation of 2-27
Autoconnect enabled and preferred service
enabled 2-28
AWAN 3886-6530 Flash RAM card 1-3
AWAN 6530 port defaults 2-28
AWAN Help, accessing and
description 1-27
B
Back panel, RS-232 to 20MA Current Loop
Converter B-2
BOOTP server C-7
C
Cable Organizer (8 lines) B-4, C-7
Cabletron (Digital) Network Software
Products 1-21
CAT-3 and CAT-5 cables 2-20
Challenge Access Protocol (CHAP) 1-3
Checklist for installation 2-2
CL 25 Host Adapter 1-13
CL 9 Host Adapter 1-13
Command Line Interpreter
compared with AWAN C-6
Commands
INITIALIZE command 2-11
INITIALIZE DELAY 0 2-14
LIST SERVER 2-14
SHOW AWAN 2-10, 2-13
SHOW AWAN to check Flash RAM
status 2-14
SHOW MEMORY
CONFIGURATION 2-12
SHOW SERVER 2-14
Configuring TTAP and Non-TTAP
printers 2-24
Creating an emulator session 2-20