AWAN 3886 Server Installation and Configuration Guide

Introduction to AWAN 3886-Series Servers

AWAN 3886 Server Installation and Configuration Guide—427428-006

1-14

Flash RAM

The Flash RAM is an Intel Series-2 two-Mbyte memory card that is hot-swappable.

You must order the 3886-6530 Flash RAM memory card to enable 6530 support.

Figure 1-7 shows a Flash RAM memory card. In order to use the 6530 code, the Flash

RAM card must remain at all times in the AWAN 3886 units, and those units must boot

from the Flash RAM card.

Even with the Flash RAM card installed, the 3886 AWAN server requires an Ethernet

connection to complete a power-on self-test (POST). If a connection to a “live” Ethernet

cannot be established, the 3886 AWAN server can be connected to a isolated

10BaseT-hub with no other Ethernet nodes.

Table 1-4. Flash RAM Memory Card (3886-6530)

Part

Number Product Description

424713-004 3886-6530

Flash RAM

card/6530

Flash memory card that contains 6530 support

for terminal emulation and GAP software. The

card is ordered separately and must be physi-

cally installed and remain in the AWAN 3886

unit. The 3886-6530 Flash RAM card contains

a special key to enable 6530 support.

A blank Flash RAM card cannot be field

upgraded to include the AWAN key and

enable 6530 support. You can, however,

upgrade an existing 3886-6530 card.

For information on upgrade and software

revisions available, see Table 1-6, Upgrade

Table: AWAN Builds and DNAS Software

Versions and Dates, on page 1-22.

Figure 1-7. Flash RAM Memory Card

CDT013.CDD