AWAN 3886 Server Installation and Configuration Guide

Contents

AWAN 3886 Server Installation and Configuration Guide—427428-006

1. Introduction to AWAN 3886-Series

Servers (continued)

1. Introduction to AWAN 3886-Series Servers (continued)

Digital Network Products Group (DNPG) Software Products 1-21

DECserver Network Access (DNAS) Version 2.4 (or later) and AWAN 6530

Code 1-21

Documentation 1-25

Digital Network Products Group (DNPG) Library CD

(DECserver 708 and DECserver 900) 1-25

Digital Network Products Group Library CD (DECserver 716 and DECserver

732) 1-26

Documentation Sources Summary (All DNPG Servers) 1-26

AWAN Online Help for T6530 Support 1-27

Migrating Asynchronous Ports from a NonStop K-Series Server to a NonStop

S-Series or Integrity NonStop NS-Series Server 1-27

Step 1: Determine the Interface Used by the Device 1-27

Step 2: Determine the Asynchronous Device 1-28

2. Installing and Configuring AWAN 3886 Servers

Preliminary Installation Checklist 2-2

Step 1: Install the Hardware 2-4

Notes for Hardware Installation for All AWAN 3886 Models 2-4

Install the AWAN 3886-8A (DECserver 708) 2-5

Install the AWAN 3886-16 and 3886-32 (DECserver 716 and 732) 2-6

Install the AWAN 3886-32 (DECserver 900TM) 2-7

Step 2: Install the Flash RAM 2-9

Install the Flash RAM Card 2-9

Use the Access Server Loader (ASL) to Download the Flash RAM File 2-9

Use the INITIALIZE Command to Update the Flash RAM 2-11

Update the Firmware on a 3886-6530 Flash RAM Card without Using ASL

(optional) 2-14

Step 3: Install ASL and ASM

2-16

Step 4: Use ASL to Set MAC and IP Addresses 2-17

Step 5: Set Up the Asynchronous Terminal or an Emulator 2-20

Set Up Internet Configuration Using the CLI 2-21

Step 6: Configure Telnet Listener for Printers from the CLI 2-22

Step 7: Configure Printer Files on the

HP NonStop Host 2-23

Configure the FASTCNFG File

2-23

Check the Printer’s Adapter 2-24