AWAN 3886 Server Installation and Configuration Guide

Introduction to AWAN 3886-Series Servers
AWAN 3886 Server Installation and Configuration Guide—427428-006
1-25
Documentation
Limitations of ASM
The AWAN 3886 server and T6530 terminal support are separate from the base-
product manufactured by DNPG. Because of this, the ASM general user interface does
not configure:
•
Port Preferred, Node, Dest, or Autoconnect
•
Port AWAN T6530-FASTP-ATAP-ANSI
•
Telnet Listener (used for printers)
These features can only be configured by using CLI commands.
Documentation
Basic hardware setup manuals can be found on the DNPG CD. They are in Adobe
Acrobat portable document format (PDF). Online help is available within the Access
Server Loader (ASL) and Access Manager Loader (ASM) applications.
For information about 6530 help support, see AWAN Online Help for T6530 Support on
page 1-27.
This guide (AWAN 3886 Server Installation and Configuration Guide) covers most of
the commonly encountered situations regarding hardware and software setup and is
the only guide that documents AWAN 6530 support on HP NonStop Servers.
Digital Network Products Group (DNPG) Library CD
(DECserver 708 and DECserver 900)
You need Adobe Acrobat Reader to view the PDFs. If you do not have Adobe Acrobat
Reader running on your PC, it is installed for you during NPIL installation.
You can access the DNPG CD through an interface that you can install on your PC.
After installing the interface, you can begin using the CD by selecting
Start>Programs> DIGITAL NPIL>DIGITAL Network Products Information Library
as shown in Figure 1-10.
A main menu is displayed. From the main menu, you can make the appropriate
selection.
Figure 1-10. DPNG Information Library
CDT400.CDD