AWAN 3886 Server Installation and Configuration Guide

Introduction to AWAN 3886-Series Servers
AWAN 3886 Server Installation and Configuration Guide—427428-006
1-27
AWAN Online Help for T6530 Support
AWAN Online Help for T6530 Support
To help support the new T6530 features for the AWAN 3886 server, a help system is
available after the Flash RAM card has been installed in the AWAN unit. You type
HELP and the following AWAN topic at the command line interpreter (CLI) prompt.
The asterisk (*) indicates AWAN help topics that are recommended for new users.
For example, to find out more about installing an AWAN 3886 for 6530 support, enter
the following at the Local> prompt:
Local>HELP AWAN_INSTALL
Migrating Asynchronous Ports from a
NonStop K-Series Server to a NonStop
S-Series or Integrity NonStop NS-Series Server
If you are migrating asynchronous ports from a NonStop K-Series Server to a NonStop
S-Series or Integrity NonStop NS-series server, you must count your installed devices
by groups. Two types of groups are:
•
interface related
•
device related
Step 1: Determine the Interface Used by the Device
To determine the correct adapters and cables for the AWAN 3886 models, you must
find out which interface is used by each device:
•
Current loop
•
RS-232 direct (as in a null modem)
•
RS-232 modem
Table 1-8. AWAN Help Topics Accessible Through the CLI
AWAN_ASL AWAN_DISABLED AWAN_REMOTE
AWAN_ASM AWAN_FACTORY AWAN_TELSERV
AWAN_ATAP AWAN_FASTP AWAN_T6530
AWAN_CABLES AWAN_FLASHRAM AWAN_UPDATE
AWAN_CLI* AWAN_INSTALL* SHOW_AWAN*
AWAN_COMMAND AWAN_MONITOR SHOW_PORT_AWAN
AWAN_CONSOLE AWAN_PRINTER