AWAN 3886 Server Installation and Configuration Guide

Introduction to AWAN 3886-Series Servers
AWAN 3886 Server Installation and Configuration Guide—427428-006
1-28
Step 2: Determine the Asynchronous Device
Step 2: Determine the Asynchronous Device
You must find out which asynchronous devices are to be connected with the AWAN
3886 unit. See Table 1-9 for a list of devices and a description of additional software or
hardware needed.
Table 1-9. Device Group and Asynchronous Devices
Device
Additional Software or
Hardware Description
6530-compatible
terminals
without additional software
•
The terminal establishes the
session when the RETURN key is
pressed.
•
The terminal name is built by the
TELSERV process and a window
name
•
Output-only terminals are not
supported
with GAP and 6530 option
•
GAP establishes the session.
•
The terminal name is built by the
GAP process and a window name.
•
Output-only terminals are
supported.
Printer TTAP Printer
•
5512, 5515, 5516, 5518, 5573,
5574, 5575
•
Requires FASTPTCP
Printer Type (5,32)
•
Non-HP (Tandem) printer only
•
Requires FASTPTCP or GAP
•
Only flow control CTS and
XON/XOFF are supported.
Non-standard
devices
Configured as (6,0), (6,1) or (6,32)
on HP NonStop K-series servers
GAP is required with ATAP option