AWAN 3886 Server Installation and Configuration Guide

AWAN 3886 Server Installation and Configuration Guide—427428-006

2-1

Installing and Configuring AWAN

3886 Servers

This section provides an overview on assembling and quickly configuring the 3886

AWAN server “out of the box” and initially connecting it to your network. The emphasis

in this section is on setting up the AWAN 3886 server for initial 6530 support, including

updating Flash RAM.

•

Required steps:

Step 1: Install the Hardware

Step 2: Install the Flash RAM

Step 3: Install ASL and ASM

Step 4: Use ASL to Set MAC and IP Addresses

Step 5: Set Up the Asynchronous Terminal or an Emulator

Step 6: Configure Telnet Listener for Printers from the CLI

Step 7: Configure Printer Files on the HP NonStop Host

Step 8: Configure Printer Ports

Step 9: Configure 6530 Ports

•

Optional steps:

Step 10: Configure the Modem Using ASM (Optional)

Step 11: Configure a Modem Port Using the CLI (Optional)

Step 12: Use a Standard Telnet Client to Access the AWAN Server (Optional)

Step 13: Obtain a Telnet Connection From the Access Server Manager

(Optional)

Step 14: Configure Point-to-Point Protocol (PPP) (Optional)