AWAN 3886 Server Installation and Configuration Guide

Installing and Configuring AWAN 3886 Servers
AWAN 3886 Server Installation and Configuration Guide—427428-006
2-2
Preliminary Installation Checklist
Preliminary Installation Checklist
Table 2-1 gives an overview of preliminary user tasks. Note that many tasks can be
combined and performed at the same time.
Table 2-1. Preliminary Installation Checklist
Task Description
1. Obtain IP addresses for the
3886 AWAN server and for
the PC running Access
Server Manager (ASM) and
Access Server Loader (ASL).
Obtain IP addresses for the DNPG PC host and
AWAN server.
Obtain the subnet mask IP address.
2. Add the appropriate NonStop
Kernel Operating system
software product revisions
(SPRs) (formerly IPMs):
•
FASTPTCP (T8932 ABF
or later)
For H-series, use
T8932H01 or later
•
Telserv (T9533 ACV or
later)
See NonStop Solutions IPM Scout on the World
Wide Web or ExpressNotice.
3. Order the appropriate AWAN
model and obtain the 3886-
6530 Flash RAM card.
See AWAN 3886 Server Models
on page 1-4.
4. Prepare the PC to have the
following:
•
Windows NT, Windows
95, Windows 98,
Windows 2000, Windows
XP
•
Any terminal or emulator
window (for example,
HyperTerm, Tera Term
Pro)
•
RS-232 serial interface
Notes:
To download a.zip file of Tera Term Pro, access
the following URL from the World Wide Web:
http://www.vector.co.jp/authors/VA002416/teraterm
.html
5. OR, Set up an asynchronous
terminal.
•
Terminal must have an
RS-232 interface
RS-232 adapters are provided by HP
manufacturing. See Appendix A, Adapters for
Cables and Devices. (A DT25RJ45 adapter is
shipped with every AWAN unit.)
See also Table 1-5, Adapters,
on page 1-15.