AWAN 3886 Server Installation and Configuration Guide

Installing and Configuring AWAN 3886 Servers
AWAN 3886 Server Installation and Configuration Guide—427428-006
2-3
Preliminary Installation Checklist
6. Check serial printer and
characteristics (baud speed,
parity, flow control)
(for example, 5524, 5525,
5526, 5527, 5528, 5529,
5530, 5531, and 5532).
Must have an RS-232 interface.
7. Obtain necessary server
adapters and server cables.
See Appendix A, Adapters for Cables and Devices
.
For current-loop support, see Appendix B, Current-
Loop Support.
8. Check NonStop TCP/IP and
start-up processes.
On the HP NonStop Server host, check that:
•
NonStop TCP/IP is running
•
Telserv and FASTPTCP are properly
configured
9. Obtain appropriate software
CDs.
These CDs contain the Digital Network Access
software. They come packaged with your AWAN
3886 server.
The DNAS V2.4 CD ROM contains AWAN build
gem217 and ASM version 2.4. For information on
software versions, see DECserver Network Access
(DNAS) Version 2.4 (or later) and AWAN 6530
Code on page 1-21.
10. Obtain and review manuals
and installation cards.
If necessary, you can review the base-product
DECserver manuals by accessing the DNPG
Network Library Products from the Digital CD NPIL
library or from the World Wide Web
(http://www.dnpg.com
).
Quick install cards for hardware installation are
provided with the older AWAN 3886 units
(DECserver 700 and DECserver 900).
Table 2-1. Preliminary Installation Checklist (continued)
Task Description