AWAN 3886 Server Installation and Configuration Guide

Contents
AWAN 3886 Server Installation and Configuration Guide—427428-006
iii
2. Installing and Configuring AWAN 3886
Servers (continued)
2. Installing and Configuring AWAN 3886 Servers (continued)
Step 8: Configure Printer Ports 2-24
Configure TTAP and Non-TTAP Printers 2-24
Configure Telnet Listener 2-25
Set Up the Line Printer Daemon (LPD) (Optional) 2-25
Step 9: Configure 6530 Ports 2-26
Understanding the Default Port Settings (Factory Reset) 2-26
Configuring Autobaud Enabled, Autobaud Disabled, Autoconnect Enabled 2-26
Understanding the AWAN 3886 T6530 Port Defaults 2-28
Step 10: Configure the Modem Using ASM (Optional) 2-31
Steps for Configuring the Modem 2-32
Step 11: Configure a Modem Port Using the CLI (Optional) 2-34
Step 12: Use a Standard Telnet Client to Access the AWAN Server (Optional) 2-35
Step 13: Obtain a Telnet Connection From the Access Server Manager
(Optional) 2-36
Step 14: Configure Point-to-Point Protocol (PPP) (Optional) 2-37
3. Troubleshooting AWAN 3886 Servers
Prepare a Checklist 3-1
Step 1: Provide Model of AWAN Server, Software Version, and Port
Configuration 3-1
Step 2: Provide Telnet Listener, Modem Settings 3-2
Step 3: Provide Local Area Network (LAN) and Printer Configuration 3-2
AWAN 3886 Troubleshooting Tables 3-3
Problem: Cannot Ping the Server 3-3
Problem: Load Failure 3-3
Problem: TFTP Download from ASL Not Completing or Download from Incorrect
TFTP Server 3-4
Troubleshooting RS-232 to 20MA Current Loop Converter
(3886-CL) 3-5
Troubleshooting Using the Power-on Sequence 3-5
Status: OK
Problem: None. AWAN Features Enabled 3-7
Status: Flashing OK LED
Problem: Transceiver Loopback Error (1) 3-8
Status: Flashing OK LED
Problem: Transceiver Loopback Error (2) 3-9
Status: Seven-segment Display Toggled Between 2 and 3
Problem: Load Failure 3-10