AWAN 3886 Server Installation and Configuration Guide

Installing and Configuring AWAN 3886 Servers
AWAN 3886 Server Installation and Configuration Guide—427428-006
2-10
Use the Access Server Loader (ASL) to Download
the Flash RAM File
1. Check your AWAN configuration by issuing SHOW AWAN to make sure which
version is your current Wweng2 file.
Local> SHOW AWAN
2. See AWAN software versions to locate the latest Wweng2 file (DECserver Network
Access (DNAS) Version 2.4 (or later) and AWAN 6530 Code). If necessary,
download the latest 3886 firmware version from http://www.geminic.com/3886.zip
and unzip it using TEDIT as the password.
3. Place the file in the correct directory.The Wweng2 file overwrites any previous
Wweng2-named file.
Figure 2-4. Flash Network Load File (Wweng2)
Example 2-1. Status from SHOW AWAN
Local> SHOW AWAN
AWAN Features Enabled
Hardware Model 3886-16
Software build 224
Vproc T0484 28Jan2002
CTRACE Not active
Config resets None
Mneng3
Wweng1
Wweng2
Digital
Access Server Manager
Access Server Loader
1,533KB File 7/2/97 12:52 PM
578KB File 7/2/97 12:53 PM
1,608KB File 7/2/97 12:53 PM
CDT010.CDD