AWAN 3886 Server Installation and Configuration Guide

Contents
AWAN 3886 Server Installation and Configuration Guide—427428-006
v
Safety and Compliance
Safety and Compliance
Glossary
Index
Examples
Example 2-1. Status from SHOW AWAN 2-10
Example 2-2. Status from SHOW AWAN 2-11
Example 2-3. Status from SHOW MEMORY CONFIGURATION Command 2-12
Example 2-4. Status from SHOW AWAN 2-13
Example 2-5. Local Messages on the Console Port 2-13
Example 2-6. SHOW AWAN 2-13
Example 2-7. SHOW AWAN Status: Flash RAM Initialization Failed 2-13
Example 2-8. SHOW AWAN Status: Flash RAM Card Write-Protected 2-14
Example 2-9. FASTCNFG File 2-23
Example 2-10. SHOW PORT AWAN (Autobaud Connect Enabled) 2-27
Example 2-11. Preferred Service Enabled 2-28
Example 2-12. Setting Autobaud Disabled, Autoconnect Enabled 2-28
Example 2-13. Setting Autobaud Disabled, Autoconnect Enabled (continued) 2-28
Example 3-1. SHOW PORT AWAN (Port 9) 3-2
Example 3-2. Port 1 Display: AWAN Features Enabled 3-7
Example 3-3. Port 1: Transceiver Loopback Error 3-8
Example 3-4. Port 1:Transceiver Failure (Install a New Flash RAM Card) 3-9
Example 3-5. Port 1: Flash RAM Card Not Installed; TFTP Server Does Not
Respond 3-10
Example 3-6. Port 1: Flash RAM Update Failed 3-11
Example 3-7.
Port 1: Rotating Figure 8 But AWAN 6530 Features Not
Enabled 3-12
Figures
Figure 1-1. Front Panel of an AWAN 3886-8A Server (DECserver 708) 1-5
Figure 1-2. Front Panel of AWAN Server Model (DECserver 716) 1-6
Figure 1-3. Front Panel of the AWAN 3886-32 (DECserver 732) 1-8
Figure 1-4. Back Panel of AWAN 3886-8A, 3886-16, and 3886-32 Servers 1-9
Figure 1-5. Front Panel of a 3886-32 Model (DECserver 900TM) 1-10
Figure 1-6. DEChub ONE with 3886-32 AWAN Model 1-11
Figure 1-7. Flash RAM Memory Card 1-14
Figure 1-8. Basic Network Configuration 1-17
Figure 1-9. Asynchronous Terminal and Serial Printer Configuration Example 1-20