AWAN 3886 Server Installation and Configuration Guide

Installing and Configuring AWAN 3886 Servers
AWAN 3886 Server Installation and Configuration Guide—427428-006
2-33
Steps for Configuring the Modem
7. Click Select to specify the modem type. The Select a modem wizard appears as
shown in Figure 2-9.
8. Use the wizard to select a modem.
9. Enter the modem property values if you did not select a pre-tested modem. (Click
Help for information about the fields and choices.)
10. When you are satisfied with your selection, select Finish.
11. Use the General tab to enter general property values for the modem. When
finished, click OK.
12. If you need to restore the normal configuration, enter the following commands at
the CLI prompt:
Local>define port n default protocol telnet
Local>define port n awan t6530
Figure 2-9. Modem Configuration Screen and Select a Modem Wizard