AWAN 3886 Server Installation and Configuration Guide

Troubleshooting AWAN 3886 Servers
AWAN 3886 Server Installation and Configuration Guide—427428-006
3-2
Step 2: Provide Telnet Listener, Modem Settings
•
The version of the Access Server Loader (ASL) and Access Server Manager
(ASM), running on your PC. To find out, access Help from the menu bar and then
select About. (You can access the version number through the client Help system
even if the Access Server Loader is not currently connected to an AWAN server.)
Step 2: Provide Telnet Listener, Modem Settings
•
Any problems regarding Telnet Listener, enter the following command at the
Local> prompt:
Local>LIST TELNET LISTENER
Write down pertinent information regarding Telnet settings.
•
Write down your modem settings (if external modems are installed).
Step 3: Provide Local Area Network (LAN) and Printer
Configuration
You need to know:
•
The LAN configuration from the 3886 AWAN server to the HP NonStop Server.
•
The version of FASTPTCP installed on the HP NonStop Server.
•
Your printer flow control settings.
•
The RJ45 cable adapters that are used.
•
The terminal or printer make, model, and configuration.
Example 3-1. SHOW PORT AWAN (Port 9)
SHOW PORT AWAN T6530 Local Prompt
Port 9 Current Type: T6530 (VT980) Permanent Type: T6530 (VT980)
Port Status: Local Prompt
Seconds since login/logout: 108 Local Accesses: 4
Pref. Service: 128.1.2.3 Preferred Dest: 5555
Preferred Node: Autobaud / Autoconnect: Yes / No
Flow Control: None / No Stops Speed/size/parity: 19200 / 7 / Even
Type-ahead In-use/max: 0 / 0 Signals: DTR RTS DSR RXD
Errors: Parity/Framing: 0 / 0 Breaks/overruns: 0 / 0
Bytes In/Out: 0 / 168 Signal Control/Longbrklog: No / Yes
6530 Timeouts send/recv: 0 / 0 6530 NAK/LRC/Reset: 0 / 0 / 0
------------------------------------------------------------------------------