Backup and Restore 2 Manual

BRCOM RESTORE Command
Backup and Restore 2 Manual—522696-019
7-43
LISTONLY Job Option
ON
lists the names of the objects that are restored successfully from tape and the
names of objects that are not restored because of errors.
DETAIL
lists the characteristics of each object restored.
OFF
lists only object names that are associated with error messages to the EMS log.
Guidelines

If you specify LISTALL ON or LISTALL DETAIL, you cannot specify LISTONLY ON
or LISTONLY DETAIL.

If you specify the LISTALL ON or LISTALL DETAIL job option but omit the OUT job
option, the LISTALL output is directed to your current terminal. The BRCOM
prompt does not return until the job completes unless you press the Break key.

If you specify the LISTALL ON or LISTALL DETAIL job option and the OUT job
option, the LISTALL output is directed to the specified out file.

Monitor EMS messages. Some messages are only sent as EMS messages, not as
LISTALL output.
LISTONLY Job Option
Use this job option to generate a list to the OUT file about the objects backed up. No
data is restored. OFF is the default.
ON
lists the objects matching the specified restore-objects that are backed up on
the tape. The specified restore-objects are not restored.
OFF
does not generate a list of objects.
DETAIL
lists the characteristics of each object on tape. The specified restore-objects
are not restored.
LISTONLY { ON | OFF | DETAIL }