Backup and Restore 2 Manual

Configuring Backup and Restore 2
Backup and Restore 2 Manual—522696-019
3-2
Displaying Configuration Information for a Job
Displaying Configuration Information for a Job
Use the INFO JOB command to display configuration information for a job. For
example:
BR> INFO JOB zbr005be;
Example 3-1. INFO CONFIG Command Display
BRJOBS Volume $data00
EMS Collector $0
Service CPU List Unspecified
Service Priority -1
Work Volume $data00
Field Description
BRJOBS Volume The disk volume on which the BRJOBS file is on.
Collector The collector for EMS messages.
Service CPU List The list of the processors in which the DMA starts the Data
Service and Tape Service. If the value is unspecified, the
Data Service and Tape Service are started in the DMA’s
processor.
Service Priority The priority at which the DMA starts the Data Service and
Tape Service. If the value is -1, the Data Service and Tape
Service are started at the same priority as the DMA.
Work Volume The disk volume on which job-related files are created.
Example 3-2. INFO JOB Command Display
JOB ZBR005BE
DMA Program File $SYSTEM.SYSTEM.BR2DMA
Data Service Program File $SYSTEM.SYSTEM.BR2DS
Service CPU List Unspecified
Service Priority -1
Tape Service Program File $SYSTEM.SYSTEM.BR2TS
Work Volume $data00