Backup and Restore 2 Manual

Configuring Backup and Restore 2
Backup and Restore 2 Manual—522696-019
3-5
Example: Overriding the Configured Values for
SERVICECPULIST and SERVICEPRI
Example: Overriding the Configured Values for
SERVICECPULIST and SERVICEPRI
For this example, the configured values in the BRCONFIG file are:
To override the configured values for SERVICECPULIST and SERVICEPRI:
BR> BACKUP $A8, OSS / , SERVICECPULIST 2,3, SERVICE PRI 120 ;
The backup job uses the currently configured values for the BRJOBS volume, EMS
collector, and work volume. Both the Data Service and Tape Service are started at
service priority 120. DMA attempts to first start the Tape Service and Data Service in
processor 2. If processor 2 is not available, DMA attempts to start the service
processes in processor 3. If neither processor is available, the DMA starts the service
processes in the processor in which the DMA is running.
Example: Overriding the Configured Value for SERVICECPULIST
In this example, the configured values in the BRCONFIG file are:
Specify SERVICECPULIST with no value:
BR> BACKUP $A8, OSS / , SERVICECPULIST ;
The DMA starts the Tape Service and Data Service in the processor in which it is
running. The backup job uses the values configured in the BRCONFIG file for the
BRJOBS volume, EMS collector, service priority, and work volume.
Setting the License of BR2DS and BR2ODS
You must set the license bit of the BR2DS and the BR2ODS files to run the following
backup and restore commands:
TACL> FUP LICENSE BR2DS
TACL> FUP LICENSE BR2ODS
BRJOBS Volume $SYSTEM
EMS Collector $0
Service CPU List Unspecified
Service Priority -1
Work Volume $SYSTEM
BRJOBS Volume $SYSTEM
EMS Collector $0
Service CPU List 2, 3
Service Priority -1
Work Volume $SYSTEM