Binder Manual (G06.27+, H06.04+, J06.03+)

Syntax Summary
Binder Manual—528613-004
9-2
SELECT Sets options for Binder operation control.
SET Sets object file characteristics to use in building the target file.
SHOW Displays collected information: current file, modify list, and controls from
the SELECT and SET commands.
STRIP Deletes Binder, Inspect, and Accelerator regions from the object file.
SYSTEM Sets the default node name for expanding file names.
VERIFY Verifies a code or data value in an object file.
VOLUME Sets the default volume and subvolume for expanding file names.
ADD { CODE entry-list } [ FROM file-name ] [ , DELETE ]
{ DATA block-list }
{ * }
or
ADD SPACE
ALTER entry-list , alter-spec [ , alter-spec ] ...
BUILD [ / OUT file-name / ] [ file-name ] [ ! ]
[ , { set-param | select-param } ] ...
CD { directory }
CHANGE
{ AXCEL ENABLE { ON | OFF } } IN file-name
{ DATA value [ PAGES | WORDS | BYTES ] }
{ HIGHPIN { ON | OFF } }
{ HIGHREQUESTERS { ON | OFF } }
{ INSPECT { ON | OFF } }
{ LIBRARY file-name }
{ PFS value [ PAGES | WORDS | BYTES ] }
{ RUNNAMED { ON | OFF } }
{ SAVEABEND { ON | OFF } }
{ SYSTYPE { GUARDIAN | OSS } }
{ SUBTYPE number }
{ TARGET { TNS | TNS/R | ANY } }
CLEAR
Table 9-1. Binder Command Summary (page 2 of 2)
Command Description