CORBA 2.3.3 Administration Guide (NonStop CORBA 2.3.3+)

This sample display shows the PATHMON backup process running in CPU 4. If the PATHMON process
encounters an internal error, it writes data-stack information to \SYS.$VOL1.TESTING.MONDUMP.
INFO SERVER Command
The following example shows the command you would type to display the configuration parameters for a single
server pool:
= INFO SERVER CS
In this command, CS is the logical name defined for the server class in the TS/MP configuration. In this example,
the command displays parameters for the Comm Server. The parameters are the attributes defined through the
SET SERVER command when the TS/MP configuration was created by the nsdstart script or through the
PATHCOM interface.
INFO SERVER Display
= info server Cs
SERVER CS
PROCESSTYPE OSS
AUTORESTART 10
CREATEDELAY 0 SECS
CWD /cust7/r1488.user/tandem/nsd2.3/nsd.e05
DEBUG OFF
DEFINE =_SRL_01,CLASS MAP,
FILE \OSS2.$DATA07.NSDE5.NSDSRL
DELETEDELAY 0 SECS
ENV NSDOM_CFG_DBM=$DATA07.NSDE5.NSDCFGDB
HIGHPIN OFF
HOMETERM \OSS2.$ZTN0.#PTPFULC
LINKDEPTH 1
MAXLINKS 16
MAXSERVERS 2
NUMSTATIC 2
OWNER \OSS2.190,0
PRI 150
PROCESS $YC01 (CPUs 0:1)
PROCESS $YC02 (CPUs 1:0)
PROGRAM /cust7/tandem/nsd2.3/nsd.e05/bin/Cs
SECURITY "N"
STDERR /cust7/tandem/nsd2.3/nsd.e05/log/cs.out
STDIN /dev/null
STDOUT /cust7/tandem/nsd2.3/nsd.e05/log/cs.out
TIMEOUT 0 SECS
TMF OFF
VOLUME \OSS2.$DATA07.DEREK
=