CORBA 2.3.3 Getting Started Guide (NonStop CORBA 2.3.3+)

ENTER the directory here (NEW or /G/<vol>/<subvol>): /G/system/master
Prefix letter
Specifies a unique prefix letter for the subsystem process names.
Use this environment variable to prevent process-name conflicts if
you have multiple JORB/DOM/CORBA/EJB installations on a single system.
ENTER prefix letter here or leave blank to use the current
value Z :
=== CHECKING for existing process $ZNDM ===
Collector Process
Specifies the EMS collector process used by the subsystem. The name
is defined in NonStop Kernel format (for example, $ZNSD0).
ENTER the Collector process you want to use or leave blank to use
the current value $0:
EMS template directory
The location of the system file TEMPLATE is required for configuring
and creating the template files. If you have multiple copies of this
file you should use the one that is open.
ENTER either a new Guardian location or leave blank to use the
current value /G/SYSTEM/SYS00 :
EMS object template directory
The destination location for EMS TEMPLATE object files is required
for configuring and creating the new template files.
ENTER either a new Guardian location or leave blank to use the
current value /G/SYSTEM/ZTEMPL :
Host name of machine
The Name of host machine on which product runs. You can use either the
symbolic name, the actual IP address, or the full symbolic name of the host.
ENTER host name here
value : 155.154.153.152
TCP process name
Specifies the TCP process name.
ENTER the TCP process name here or leave blank to use the
current value $ZTC0 :
=== CHECKING for existing process $ZTC0 ===
TCP/IP base port number
The port number you specify here and the next three sequential ports
will be allocated for the subsystem.