CORBA 2.6 Administration Guide

EventServiceIORFile
If present, specifies the filename to which the Event Service object reference is stored.
event_service@ORB
tcp_process
The TCP process associated with host_name. The default is $ZTC0. The default TCP process name for Parallel Library TCP/IP is
set when Parallel Library TCP/IP is installed. You can locate the Parallel Library TCP/IP process for your system by using the SCF
command LISTDEV TCPIP and looking for a process with program path ending in TCPSAM.
port_number
The port number used by the Event Service.
tcp_server
Sets the IIOP protocol.
host_name
The address used by the Event Server.
ilsd1@ORB
host_name
The address used by the ILSD.
parallel_ip
Specifies whether or not Parallel Library TCP/IP is enabled.
port_number
Specifies the port number that the ILSD listens on. At installation, this port number is set to $portnumber3 (where
$portnumber0 is the number you specify for TCP/IP). If you have more than one copy of NonStop CORBA installed on a NonStop
server, each copy must have a different ILSD port number.
tcp_process
The TCP process associated with host_name. The default is $ZTC0. The default TCP process name for Parallel Library TCP/IP is
set when Parallel Library TCP/IP is installed. You can locate the Parallel Library TCP/IP process for your system by using the SCF
command LISTDEV TCPIP and looking for a process with program path ending in TCPSAM.
tcp_server
Sets the IIOP protocol.
ird1@ird_settings
IRFiles
A search path for IR databases. Multiple IR databases can be used if separated by semicolons. The rightmost database listed receives
updates for new IR entries. When you modify an IR, the search begins on the left, then proceeds until the correct IR is found. Any
updated IR replaces the existing IR in the same database.
IRIORFILE
Specifies the filename to which the Interface Repository (IR) object references are stored.
NSName
Specifies the name under which the Interface Repository Daemon (IRD) is registered in the Naming Service.
ird1@ORB
fs_server
Sets the file system protocol.
use_comm_server
Used with IIOP protocol.