CORBA 2.6.1 Administration Guide

Write object
reference to a
file
Recommended: Leave this box checked. Applications without access to object references in the Naming Service
might need to get the object reference from a file.
File name Name of the object reference file.
Server Configuration Options
Property Description
Process
name
Name of the server process. If you do not choose a name, the system assigns one when the process starts.
Processors List of CPUs in which server processes can run. Separate the CPU numbers with commas; for example, 1,2,5. If you
do not specify a list of CPUs, the system runs server processes in any available CPU. Specifying certain CPUs
requires the system to use only the CPUs in the list.
Process
priority
Priority at which the server process is run. The range of values is 1 through 199, the highest priority being 199.
Autorestart
attempts
Number of attempts to restart the server process, in the event of its abnormal termination. The maximum number is
32767.
Log file
name
Name of the file to which server process output is written.
Object Transaction Service (OTS) Properties
Server Configuration Options
Troubleshooting Options
Server Configuration Options
Property Description
Maximum
servers
Maximum number of copies of a server process that can run in a server pool at the same time. The range of values
is 0 through 4095.
Static
servers
Number of static servers, which are processes that are started automatically when the TS/MP environment starts.
(Dynamic servers are started as needed by the PATHMON process.) The range of values is 0 through 4095. The
value must not exceed the value of the Maximum servers field. For OTS, it is recommended to configure the Static
servers field to be equal to Maximum servers, because using dynamic servers can lead to aborted transactions under
some circumstances. Setting the number of static servers close to or equal to the value for Maximum servers also
enhances performance.
Process
name
Name of the server process. If you do not choose a name, the system assigns one when the process starts.
Processors List of CPUs in which server processes can run. Separate the CPU numbers with commas; for example, 1,2,5. If you
do not specify a list of CPUs, the system runs server processes in any available CPU. Specifying certain CPUs
requires the system to use only the CPUs in the list.
Process
priority
Priority at which the server process is run. The range of values is 1 through 199, the highest priority being 199.
Autorestart
attempts
Number of attempts to restart the server process, in the event of its abnormal termination. The maximum number is
32767.
Create
delay
Length of time in microseconds requests are queued while a LINKMON process waits for a server (static or dynamic)
to become available. When this time period is exceeded, the PATHMON process creates a dynamic server to process
requests. The maximum time is 18 hours.
Delete
delay
Length of time in microseconds the PATHMON process waits before deleting unused dynamic server processes. The
maximum time is 18 hours.
Max links Maximum number of links that a server process in a server pool can have to all LINKMON processes on the host
system. For example, if the Link depth field is set to 10 and there are 3 CPUs in the host system, set the Max links
field to 30 to avoid queueing requests at the server process. While a server process is processing a request, the
maximum number of queued requests is the value of the Max links field minus 1. The range of Max links values is 0
through 4095.
Link depth Number of concurrent links allowed from a LINKMON process to a particular server process in a server pool. The