CP6100 Configuration and Management Manual

Managing CP6100 Using the Subsystem
Control Facility (SCF)
CP6100 Configuration and Management Manual—426741-003
8-11
Modifier Set for the ALTER LINE ADCCP Command
Modifier Set for the ALTER LINE ADCCP Command
The modifier set for the ALTER LINE ADCCP is one or more of the following modifier
name and value combinations. The modifiers are listed alphabetically and are
described in Section 4, ADCCP Protocol and Modifiers.
Examples of the ALTER LINE ADCCP Command
The following command alters the line $CPL1, including the LINE and STATIONS
values:
->ALTER LINE $CPL1, ADCCP, LINETYPE FULL, STATIONS 5
The following command alters the line $CPL1, including the TRANSLATE value:
->ALTER LINE $CPL1, ADCCP, TRANSLATE ON
[ , ADDRESS0 { 0 through 254 } ]
[ , ADDRESS1 { 0 through 254 } ]
[ , ADDRESS2 { 0 through 254 } ]
[ , ADDRESS3 { 0 through 254 } ]
[ , BYTESINADDRFLD { 1 through 4 } ]
[ , DSRTIMER { 0 through 32767 } ]
[ , EXTENDED { OFF | ON } ]
[ , FLAGIDLE { FALSE | TRUE } ]
[ , IDLETIMER { 0 through 32767 } ]
[ , L1RETRY { 0 through 255 } ]
[ , L2RETRY { 0 through 255 } ]
[ , LINETYPE { FULL | HALF } ]
[ , MAXFRAME { 75 through 3222 } ]
[ , NOCARRFATAL { NO | YES } ]
[ , NOREJ { NO | YES } ]
[ , OPCLASS { ANY | ASYNC | BISYNC | BITSYNC } ]
[ , POLL { NO | YES } ]
[ , PROGRAM file-name ]
[ , RESPONSE { NRM | ABM | ARM } ]
[ , SREJ { NO | YES } ]
[ , SNAXLATE { OFF | ON } ]
[ , STATIONS { 1 through 254 } ]
[ , SWINCARRIER { NO | YES } ]
[ , SWITCHED { NO | YES } ]
[ , SWOUTCARRIER { NO | YES } ]
[ , T1TIMER { 10 through 32767 } ]
[ , THRESHOLD { 0 | 100 through 32767 } ]
[ , TRANSLATE { OFF | ON } ]
[ , TWA { NO | YES } ]
[ , WINDOW { 1 through 7 | 1 through 127 } ]
[ , XFERTIMER { 10 through 32767 } ]
[ , XLENGTH { 0 through 2046 } ]
[ , XOFFSET { 0 through 2045 } ]