CP6100 Configuration and Management Manual

CP6100 Configuration and Management Manual—426741-003
ix
About This Manual
The CP6100 Configuration and Management Manual describes how to plan, configure,
and manage the CP6100 subsystem and includes:
•
A configuration “quick start” that provides the basic information required to enable
you to quickly and easily define and start the CP6100 subsystem
•
An explanation of the major features and capabilities of the CP6100 subsystem
•
An explanation of how to configure the CP6100 subsystem
•
A description of the Subsystem Control Facility (SCF) interactive interface for the
CP6100 subsystem, including detailed reference information for each of the
CP6100 subsystem SCF commands
Who Should Use This Manual
This manual is intended primarily for system managers responsible for installing and
managing the CP6100 subsystem. It may also be used for reference by application
programmers using CP6100 lines for data communications.
It is assumed that you are already familiar with the NonStop system configuration
process and have access to the WAN Subsystem Configuration and Management
Manual and installation documentation.
What’s in This Manual
Table 1 summarizes the contents of this manual.
Table 1. Summary of Contents (page 1 of 2)
Section Title This section . . .
1 Configuration Quick Start
Provides the basic information required to
enable you to quickly define and start the
CP6100 subsystem.
2 Overview of the CP6100
Subsystem
Provides an overview of CP6100 and the
configuration programs that can be used with
CP6100.
3 Configuring the CP6100
Subsystem
Describes the steps for configuring a CP6100
subsystem and provides examples.
4 ADCCP Protocol and
Modifiers
Provides a brief overview of the ADCCP
protocol, lists the contents of the PCP6ADCP
profile, and describes all ADCCP modifiers.
5 BSC Protocol and Modifiers
Provides a brief overview of the BISYNC
protocol, lists the contents of the PCP6BSC
profile, and describes all BISYNC modifiers.