CP6100 Configuration and Management Manual

Managing CP6100 Using the Subsystem

Control Facility (SCF)

CP6100 Configuration and Management Manual—426741-003

8-12

Modifier Set for the ALTER LINE BSC Command

The modifier set for the ALTER LINE BSC is one or more of the following modifier

name and value combinations. The modifiers are listed alphabetically and are

described in Section 5, BSC Protocol and Modifiers.

Examples of the ALTER LINE BSC Command

The following command alters the line $CPL1, including the CONTROLCF,

INTERNALCLK, BAUD, and STATION values:

->ALTER LINE $CPL1, BSC, CONTROLCF YES, INTERNALCLK YES,

BAUD 3600, STATION SECONDARY

The following command alters the line $CPL1, including the FCS, CHARSET, and

RETRIES values:

->ALTER LINE $CPL1, BSC, FCS LRC, CHARSET USER, RETRIES 10

[ , BAUD { 1200 | 1800 | 9600 | 2000 | 2400 | 3600 }

{ 4800 | 7200 | 19200 } ]

[ , CHARSET { ASCII | EBCDIC | USER } ]

[ , CONNECTTO { 0 through 32767 } ]

[ , CONNTYPE { PPSW | PPNSW } ]

[ , CONTROLCF { NO | YES } ]

[ , DISCONNECTTO { 0 through 32767 } ]

[ , FCS { CRC16 | LRC } ]

[ , IDEXCHG { NO | YES } ]

[ , INTERNALCLK { NO | YES } ]

[ , ITBSIZE { 0 through 32767 } ]

[ , LINETYPE { FULL | HALF } ]

[ , NONSTOP { OFF | ON } ]

[ , OPCLASS { ANY | ASYNC | BISYNC | BITSYNC } ]

[ , PROGRAM file-name ]

[ , PROTOCOL { PTPT | HASP } ]

[ , READTO { 0 through 32767 } ]

[ , RETRIES { 0 through 255 } ]

[ , STATION { PRIMARY | SECONDARY } ]

[ , SYNCS { 3 through 255 } ]