CP6100 Configuration and Management Manual

Managing CP6100 Using the Subsystem
Control Facility (SCF)
CP6100 Configuration and Management Manual—426741-003
8-16
INFO LINE Command Display for the ADCCP
Subtype
INFO LINE Command Display for the ADCCP Subtype
The format of the display for the INFO LINE command for the ADCCP subtype with the
DETAIL option is shown below. Alterable modifiers are denoted with an asterisk. Refer
to the applicable protocol section of this manual, for detailed descriptions of these
modifiers.
CP6100 DETAIL INFO LINE $CPA1
*Opclass...........BITSYNC
*Program...........$SYSTEM.CSS01.C8169P00
Type/Subtype......(51,2) Protocolid...........13
ADCCP INFO
*Line Type.........FULL^DUPLEX *Switched............NO
Alter Attr Set....ADCCP
*Response Mode.....NRM *Extended............OFF
*Stations..........1 *No Carr Fatal.......NO
*Max Frame.........256 *Bytes In Addr Fld...1
*Address 0.........0 *Address 1...........0
*Address 2.........0 *Address 3...........0
*Translate.........ON *Snaxlate............OFF
*Xoffset...........0 *Xlength.............0
*Poll..............YES *Selective Rej.......NO
*No Reject.........YES
*TWA...............NO *Window..............3
*Sw Incarrier......YES *Sw Outcarrier.......NO
*L2 Retry..........3 *L1 Retry............3
*Threshold.........500 *Flag Idle...........FALSE
*Idle Timer........100 *T1 Timer............100
*Xfer Timer........100 *DSR Timer...........300