CP6100 Configuration and Management Manual

Managing CP6100 Using the Subsystem

Control Facility (SCF)

CP6100 Configuration and Management Manual—426741-003

8-17

INFO LINE Command Display for the BSC Subtype

The format of the display for the INFO LINE command for the BSC subtype with the

DETAIL option is shown below. Alterable modifiers are denoted with an asterisk. Refer

to the applicable protocol section of this manual, for detailed descriptions of these

modifiers.

CP6100 DETAIL INFO LINE $CPB2

*Opclass...........BISYNC

*Program...........$SYSTEM.CSS01.C9310P00

Type/Subtype......(51,1) Protocolid..........9

BSC INFO

*Line Type.........HALF^DUPLEX *Conn Type...........PPSW

Alter Attr Set....BSC

*Control CF........NO *Internal Clock......NO

*Baud..............INVALID

*Conn Timeout......3000 *Disconn Timeout.....50

*Read Timeout......3000

*Station Type......PRIMARY *Frame Chk Type......CRC16

*Char Set..........EBCDIC *Protocol............PTPT

*Id Exchange........NO *Syncs...............3

*Retries............7 *ITB Size............0

*Nonstop............OFF