CP6100 Configuration and Management Manual

Managing CP6100 Using the Subsystem

Control Facility (SCF)

CP6100 Configuration and Management Manual—426741-003

8-21

STATS Command

The STATS command displays statistical information for the specified line. In addition

to the statistical information, a timestamp is also returned that indicates when the

statistics were last reset for the line. STATS is a nonsensitive command.

Command Syntax for the STATS Command

The STATS command has the following syntax:

OUT file-spec

causes any SCF output generated for this command to be directed to the specified

file.

LINE line-name

designates the line whose statistical information you wish to display. If you omit the

line-name, the statistics for the assumed line are displayed (for information

about the ASSUME command, see the SCF Reference Manual for G-Series RVUs

or SCF Reference Manual for H-Series RVUs).

RESET

If present, restores all the statistics counters to their initial values after the statistics

are displayed.

RESET is a sensitive option. That is, it can be specified in a STATS command only

by a user with super-group access, the owner of a subsystem, or a member of the

same group as the owner of the subsystem.

The owner of the subsystem is the user who started the subsystem or any user

whose application ID is the same as the server ID.

STATS [ / OUT file-spec / ] [ LINE line-name ] [ , RESET ]