CP6100 Configuration and Management Manual

Managing CP6100 Using the Subsystem
Control Facility (SCF)
CP6100 Configuration and Management Manual—426741-003
8-25
STATUS Command
STATUS Command
The STATUS command displays the dynamic information for a line. STATUS is a
nonsensitive command.
Command Syntax for the STATUS Command
The STATUS command has the following syntax:
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
LINE line-name
designates the line whose status information is to be displayed. If you omit
line-name, the status of the assumed object is displayed (for information about
the ASSUME command, see the SCF Reference Manual for G-Series RVUs or
SCF Reference Manual for H-Series RVUs).
DETAIL
If present, returns complete status information. If you omit DETAIL, only a single
line of data is displayed for each object name.
Display for the STATUS LINE Command
The display for a LINE object without the DETAIL option is as follows:
Name
is the name of the line.
State
is the summary state of the line.
PPID
is the CPU number and the primary Process Identification (PID) number of the line.
STATUS [ / OUT file-spec / ] [ LINE line-name ] [ , DETAIL ]
CP6100 STATUS LINE
Name State PPID BPID I/O ADDR Track Id
$CPL1 STARTED (2,62) (3,63) 0,4,%3,%0 A00001